It can be dangerous to try to go around the FRP on your Vivo Y15s. Using this approach could void your warranty because it requires you to disassemble your phone and make electrical connections on the motherboard. Be mindful of the possible hazards, proceed with caution, and confirm that you have the necessary hardware and software.
Factory Reset Protection (FRP): What is it?
Google created the security feature known as Factory Reset Protection (FRP) to shield Android devices from unwanted access after a factory reset. You must use the Google account that was previously used on the device to log in once FRP is enabled. You are unable to access your smartphone without these credentials.
Vivo Y15s EDL
Comprehending the Test Point Approach
One technical way to get around FRP on cellphones is to use the Test Point approach. This technique helps get around the Google account verification by opening the device, finding certain places on the motherboard, and connecting these connections to start the MTK Emergency Download (EDL) mode.
Crucial Equipment and Setup
Prior to beginning the procedure, collect the necessary equipment:
A tiny Phillips screwdriver
A plastic pry tool
Tweezers made of metal
USB cord
Qualcomm device-compatible FRP bypass software
To guard against unintentional harm to your device, make sure you’re operating in a clean, static-free environment.
Step-by-Step Guide to Perform a Test Point on Vivo Y15s
1. Disassemble Your Device
To access the Test Point, you’ll need to open up your Vivo Y15s:
- Turn Off Your Phone Completely: Power down the device to avoid electrical damage.
- Remove the Back Cover: Use a plastic pry tool to gently lift off the back cover.
- Locate the Motherboard: Once the back cover is off, you should be able to see the motherboard.
2. Locate the Test Points on the Motherboard
Each version of the Vivo Y15s may have slightly different Test Point locations. Generally, they are near the main CPU or integrated circuit (IC):
- Refer to Model-Specific Diagrams: Check an official manual or guide for your Vivo Y15s model for accurate Test Point locations.
- Examine Carefully: Use a flashlight if necessary to locate the points, ensuring you don’t accidentally short any other connections.
3. Create a Bridge Using Metal Tweezers
Now, it’s time to short-circuit the Test Points to access the emergency mode:
- Position the Tweezers: With your phone still off, carefully place the metal tweezers to bridge the two Test Points.
- Hold Steady: Keep your hands steady to avoid accidental contact with other components.
4. Connect the Device to a Computer
With the Test Point bridged, connect your Vivo Y15s to a computer:
- Connect with a USB Cable: Use a reliable USB cable to link the phone to your computer.
- Verify EDL Mode Activation: If successful, the phone should automatically enter Qualcomm’s Emergency Download (EDL) mode, which is necessary to bypass FRP.
5. Use FRP Bypass Software to Remove the Google Account Lock
Finally, with your Vivo Y15s in EDL mode, you can use bypass software to remove the FRP lock:
- Install FRP Bypass Software: Programs like MTK Flash Tool and others compatible with Qualcomm processors are popular choices.
- Follow Software Instructions: Each program varies, but typically you’ll need to select the connected device and initiate the bypass.
- Wait for Confirmation: The software will notify you once the process is complete, and the Google account lock is removed.
Vivo y15s test point
In conclusion
The Test Point approach is a workable way to get around the FRP on your Vivo Y15s if you’re locked out following a factory reset. But it’s important to pay close attention to each step and make sure you have the required hardware and software available. Proceed with caution as this procedure may terminate your warranty.
